No products in the cart.
Return To Shop
Call Us: (+972) 050-7747477
Write Us: [email protected]
-----Free Local 7 Days Shipping on Orders 79$-----
-----Free Next Day shipping on orders $199-----
0
(₪0.00)
0
Shopping cart (0)
Subtotal: ₪0.00
Spend to get free shipping
You've got free shipping !!!
Free shipping over 79$
0
(₪0.00)
0
No products in the cart.
Return To Shop
Shopping cart (0)
Subtotal: ₪0.00
Spend to get free shipping
You've got free shipping !!!
Free shipping over 79$
Filter by price
Sucker Clamp Adjustable Table Vise Rotatable
₪60.69
1. 360 degree rotation, stable clamping 2.Suitable for all kinds of flat tabletops, suction cup is more stable with water adsorption 3. Plastic card slot,...
Micro DC-DC BEC 5V/12V Input 5V-30V
₪24.25 – ₪30.33
MINI DC-DC BEC 5V/2.5A Mini DC Step-Down Module Input voltage: 2-6S (5-30V) Output voltage: 5V ± 0.1V Output current: 2.5A (MAX) Conversion efficiency: 90% Size:...
2S-6S Lipo Battery USB Converter
₪36.402S-6S Lipo Battery USB ConverterXT60 Plug Cellphone Charger
Adapter
₪60.69
FrSky 900MHz Super 8 Antenna for R9M and R9M Lite Module Description: Brand: FrSky Item Name: FrSky Super 8 Antenna Specification Frequency Range: 868MHz ( EU...
₪101.17
GPS Module Nano Ublox M8
• Compact size (φ23.88mm x19.98mmx8.80mm±0.5mm ) suitable for space-sensitive application
• Weight 7.8 grams without TPU Protective Case Shell
Radiolink Pixhawk 2.4.6 Flight Controller
₪497.89
Radiolink Pixhawk is a real king of the open source flight controller made by Radiolink. On the basis of 3DR PIX function, it developes optimized circuit design and creative design automation software QA system, which guarantee the quality of product.
₪161.89
Features
- 72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C
- On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
- Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity
- Build-in embedded GNSS patch antenna, low power consumption
- The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design.
- Magnetic sensor QMC5883L integrated
- Max navigation update rate Single GNSS up to 18 Hz 2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz
- Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP
- Velocity accuracy 0.05m/s
- Cold start 26 s Aided cold starts: 2 s Hot start 1 s
- Sensitivity Tracking & Navigation: –165 dBm Reacquisition: –158 dBm Cold start: –146 dBm Hot start: –155 dBm
- Input voltage range: 4~6V
- Power consumption: 40mA
- Uart (Tx,Rx) interface for GPS SAM-M8Q
- I2C (DA,CL) interface for Compass QMC5883L
- Battery for HOT module start
- Power LED(Red) & Time pulse LED(Blue)
- Dimensions: L20 x W20 x H10 mm
- Weight: 7 gram
- Supported by INAV/Betaflight/Ardupilot, ect.
Including
- M8Q-5883 module, 1 pc
- SH1.0-6P 20cm silicon wire, 1 pc
- Transparent PVC Heat-shrink tube
Tips
- GPS, GLONASS, SBAS, QZSS are enabled by default
- u-blox M8Q series has no external flash memory
- Blue PPS LED blinking(1Hz) means 3D fixed
- update rate 1Hz & baudrate 9600 default
- Baud 9600~115200 supported by INAV/BF/Ardupilot
- update rate 5Hz with INAV UBLOX Protocol
- update rate 10Hz with INAV UBLOX7 Protocol
- Compass Alignment(Arrow forward and flat mounting): INAV/BetaFLight: CW 270° Flip when flight controller arrow is facing forward also Ardupilot/Mission Planner: Rotation None
- BF doesn’t support GPS position hold and RTH, GPS Rescue mode is supported by BF3.5 or last.
- No need compass for Fixed wings with INAV firmware
- The scratches on ceramic antenna are the result of tuning the antenna by ublox.
- Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
₪40.45
Full Speed Lucky Box Buzzer User Manual: Lucky Box Manual.PDF
Brand:FullSpeed
Item name:Lucky Box Beeper
Input Voltage: 5V
Battery: 60mAh
Volume: 90db
Weight: 2.3g
Size：15.5x13.5x10.5
-Level 2 menu(long beep x 1 & short beep x 2) to set up the tone’s rate.
-After setting up level 1&2 menu, long press for 5s to save and exit set up. The buzzer will short beep x 3 & long beep x 1.
Please repower the Lucky Box Buzzer after setting up.
Brand:FullSpeed
Item name:Lucky Box Beeper
Input Voltage: 5V
Battery: 60mAh
Volume: 90db
Weight: 2.3g
Size：15.5x13.5x10.5Full Speed Lucky Box Buzzer
User Manual
-The FSD Lucky Box Buzzer is a fully automatic acoustic & light alarm for your miniquad or any other kind of aircraft that could suffer from battery ejection after a crash. After the main battery is accidentally disconnected, it will activate the alarm state which you can set up by yourselves.
-The FSD Lucky Box Buzzer can be used as a regular buzzer and there is no complicated installation or maintenance process involved. If you would like to use it as a regular buzzer on your aircraft you just need to connect it to a 5V power input, common Ground and a FC buzzer Ground, since it supports a buzzer passthrough.Switch on:
-Power up the buzzer with 5V to switch on.
-After switching on the buzzer, it will long beep x 1 and short beep x 1-3(1 means the buzzer’s battery voltage lower than 3.7V, 2 means lower than 4V, 3 means highter than 4V)Switch off :
When the automatic alarm is not activated(two methods):
-Short press the button for 3 times to switch off the buzzer (about 1 times per sec.)
-Disconnect and connect the main battery for 8-10s and disconnect the main battery again to switch off the buzzer.
When the automatic alarm is activated(two methods):
-Short press the button for 3 times to switch off the buzzer (about 1 times per sec.)
-Power up with 5V.
You will hear the quick-short tone when the buzzer is switched off.
Some flight controllers’s buzzer pads use a different method than the lucky box is designed for. It will still work but buzzer will constantly sound and can only be turned off when battery reconnected(Short press the button for 3 times to switch off the buzzer) Tone setting:
-Long press the button for 5s to: enter level 1 menu/ level 2 menu/ exit set up menu. Short press x 1 to select the option.-Level 1 menu(long beep x 1 & short beep x 1) to set up when will it beep after the main battery disconnect.| Short beep x 1 | Short beep x 2 | Short beep x 3 |
| Beep after 30s | Beep after 60s | Beep after 120s |
| Short beep x 1 | Short beep x 2 | Short beep x 3 |
| Beep per 3s (about 2h 30mins with full voltage) | Beep per 10s (about 5h 30mins with full voltage) | Beep per 30s (about 12h with full voltage) |
₪348.11
FC Specifications MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM20602 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD...
₪319.77
FC Specifications MCU: STM32F765VIT6, 216MHz , 512KB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM20602 (SPI3) Baro: BMP280 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card...
₪238.81
FC Specifications MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) Baro: BMP280 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD card slot (SPI) 5x Uarts (1,2,3,4,6) with built-in inversion...
₪161.89
FC Specifications MCU: 100MHz STM32F411 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: No VCP & 2x UARTs 2x Motors,...
₪202.37
FC Specifications MCU: 168MHz STM32F405 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP & 6x...
₪32.35
FETtec Spike Absorber well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components designed for use with an electrolytic capacitor, which can be...
₪125.46
Features: Graphic OSD (STM32) Full KISS Tuning Filter (PIDs, Rates, Settings) LED control (RGB LED, Racewire) VTX Live data graphs (Voltage, motor rpm, current, motor...
O.R.T Dual Shield Pro 5.8GHz Dual Patch Anten...
₪125.46
Features: Not a mimo antenna! Easy, Plug & Play setup. 3D printed antenna mounts firmly to your goggles using 3M VHB Tape. Fits your Fatshark...
₪121.41
Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments. Smart Port – Full Duplex communication Easy to bind and...
₪1,214.42
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
₪190.23
The NEO-M8 is optimized for cost sensitive applications, while NEO-M8N and NEO-M8Q provide best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
₪16.16
Amass XT30U Male Female Bullet Connector Plug the Upgrade XT30 For RC FPV Lipo Battery RC Quadcopter
₪28.30
Gold-plated :2U-2.5U Plug size: 4.5mm Current: 65A-120A Weight: 13.5g Temperature : -30°C–240 °C Max. Wire Connection: 8AWG 1. Arch shape and groves design 2. 4.5mm gold plated banana plug Just like...
₪153.80
Radiolink TS100 Mini M8N GPS Module UBX-M8030 For Radiolink Mini PIX F4 Flight Controller
WORLDWIDE DELIVERY
© Created with by Gal Vital.
