et-loader

Return to previous page
Specification
Image sensor: 1/2.7″ CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL,changeable
Video Resolution: 1080P@60fps  / 720@60fps
Power Input: DC 4.5-20V
FPV FOV : 155°
Recording FOV :170°
Mini Illumination: 0.1lux
Image Resolution: 2 Megapixels
Lens: Full Size Turbo Eye Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MOV
ELectronic shutter : PAL : 1/50-100,000  NTSC : 1/60-100,100
Real-time Audio Output: Yes
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above,recommend Class 10/UHS-I/UHS-II)
Dimension: SD Slot Module 28*29mm / Camera 19*19mm (installed with 20*20mm, expand to 30*30mm )
Working Temperature: -20?~+60?
Net weight: 12g(more or less)
Package Included
1 x Caddx Turtles Camera
1 x 5D-OSD Menu Board
1 x Bracket for camera
2 x Extended bracket for 1080P HD recorder
1 x 4pin FPV Silicon Cable (extend into a 2pin joint for OSD board and a 3pin joint for FPV)
3 set x Screw
1 set x Copper cylinders
1 x Internal hexagonal wrench
1 x Manual
1 x Warranty card

Quick operation guide

1. RIGHT  BUTTON Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker.
2. LEFT BUTTON Press the LEFT button for 3s-5s to stop video recording.
3. DOWN BUTTON  Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P.
4. MIDDLE BUTTON The MIDDLE button is menu button.

Notice: The camera need  at least 8G Class 10 SD card.

Notes:If the power is cut accidentally when video recording,please power on again, then the camera will automatically restore the memory,
and the video records before power cut will be still saved in TF card.


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

You can add any HTML here (admin -> Theme Options -> E-Commerce -> Promo Popup). We suggest you create a static block and put it here using shortcode