Keep your TX16 safe in style with the official RadioMaster zipper case. This zipper case can be put around the foam box that is always supplied with every TX16s and offers a convenient and safe way to transport your favorite transmitter.
1. 360 degree rotation, stable clamping 2.Suitable for all kinds of flat tabletops, suction cup is more stable with water adsorption 3. Plastic card slot,...
Clamp Steel PCB Board Soldering Holder 1.Universal holder for mobile phone repair. 2.Simple operation, precision screw positioning. 3.Three pieces bayonet can be moved, you can...
Description: XT60 Connector 1-Male 2-Female Serial Connection Cable Total length: 11cm Wire: silicon wire 14AWG Connectors: 1 male and 2 female connectors in SERIAL connection...
Multi-function wire:8 in 1 one side:4.0MM golden connector length:300MM Main wire : 14AWG red /black silicone wire 150MM with Male 4.0MM banana connector . Branch...
FrSky 900MHz Super 8 Antenna for R9M and R9M Lite Module Description: Brand: FrSky Item Name: FrSky Super 8 Antenna Specification Frequency Range: 868MHz ( EU...
A replacement or spare antenna for the Caddx Vista Specifications Brand: Caddx FPV Variant: Standard 8cm / 15Cm Weight: 4 g Includes 1 x Caddx Vista...
-The FSD Lucky Box Buzzer is a fully automatic acoustic & light alarm for your miniquad or any other kind of aircraft that could suffer from battery ejection after a crash. After the main battery is accidentally disconnected, it will activate the alarm state which you can set up by yourselves.-The FSD Lucky Box Buzzer can be used as a regular buzzer and there is no complicated installation or maintenance process involved. If you would like to use it as a regular buzzer on your aircraft you just need to connect it to a 5V power input, common Ground and a FC buzzer Ground, since it supports a buzzer passthrough.Switch on:-Power up the buzzer with 5V to switch on.-After switching on the buzzer, it will long beep x 1 and short beep x 1-3(1 means the buzzer’s battery voltage lower than 3.7V, 2 means lower than 4V, 3 means highter than 4V)Switch off :When the automatic alarm is not activated(two methods):-Short press the button for 3 times to switch off the buzzer (about 1 times per sec.)-Disconnect and connect the main battery for 8-10s and disconnect the main battery again to switch off the buzzer.When the automatic alarm is activated(two methods):-Short press the button for 3 times to switch off the buzzer (about 1 times per sec.)-Power up with 5V.You will hear the quick-short tone when the buzzer is switched off.
Some flight controllers’s buzzer pads use a different method than the lucky box is designed for. It will still work but buzzer will constantly sound and can only be turned off when battery reconnected(Short press the button for 3 times to switch off the buzzer) Tone setting:-Long press the button for 5s to: enter level 1 menu/ level 2 menu/ exit set up menu. Short press x 1 to select the option.-Level 1 menu(long beep x 1 & short beep x 1) to set up when will it beep after the main battery disconnect.
Short beep x 1
Short beep x 2
Short beep x 3
Beep after 30s
Beep after 60s
Beep after 120s
-Level 2 menu(long beep x 1 & short beep x 2) to set up the tone’s rate.
Short beep x 1
Short beep x 2
Short beep x 3
Beep per 3s(about 2h 30mins with full voltage)
Beep per 10s(about 5h 30mins with full voltage)
Beep per 30s(about 12h with full voltage)
-After setting up level 1&2 menu, long press for 5s to save and exit set up. The buzzer will short beep x 3 & long beep x 1.Please repower the Lucky Box Buzzer after setting up.
The best drone backpack for DJI Mavic series and foldable drones. Specially designed for the DJI Mavic series backpack turns easily from a daypack into...
The Aerum Polar X is a dual polarized receiver antenna. It combines two linear, cross polarized antennas in one streamlined form factor and works best paired together with Aerum Polar S & P
The revolution in circular 5.8 GHz technology. Hand-tuned for ultimate noise and reflection rejection. True circularity and great range. Designed by none other than IBCrazy. SMA version.
The Immortal T is a new creation for all the hardcore racers and freestylers out there that have grown to love the TBS Crossfire. It survives prop strikes without breaking a sweat and mounts perfectly to your frames! Tested by the world's leading freestyle pilots, it has their "seal of approval"
A slightly-directional antenna for best signal penetration. Built ultra-durable using lessons learned from TBS Triumph, and designed by none other than IBCrazy!
Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers.
The Foxeer line of antennas provides many different options for all FPV enthusiasts needs. If you're looking for a specific color, length, Left Hand Polarization, or Right Hand Polarization. These antennas can be used both on the Video Transmitter side, and the Video Receiver side.
“Pagoda 2” is based on Maarten Baert optimized circular polarized antenna, Produced by GEPRC customize a 5.8 G antenna, is the scope of its bandwidth of 500 MHZ (5.55 to 6.05 GHz). Structure consists of three layers of 1 oz copper foil embedded PCB, only 8 grams of weight,use special heat shrink packaging, solid, durable, and beautiful. PCB materials used 1.0 mm FR – 4, 1 oz copper foil.
Pagoda 2 has natural advantages, axis ratio is below 1.3, standing wave ratio of 1.2.Can be used for transmitting antenna and receiving antenna (transmit and receive all use pagoda2 antenna is better).
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
