No products in the cart.
Return To Shop
Call Us: (+972) 058-7877787
Write Us: [email protected]
-----Track Your Order
Found Your Shipment
-----Free Local 7 Days Shipping on Orders 79$-----
-----Free Next Day shipping on orders $199-----
0
₪0.00
0
Shopping cart (0)
Subtotal: ₪0.00
Spend ₪320.00 to get free shipping
You've got free shipping !!!
Free shipping over 79$
Menu
0
₪0.00
0
No products in the cart.
Return To Shop
Shopping cart (0)
Subtotal: ₪0.00
Spend ₪320.00 to get free shipping
You've got free shipping !!!
Free shipping over 79$
Filter by price
Filter by
Show details
This product has multiple variants. The options may be chosen on the product page
Caddx Nebula Pro Digital Camera (12Cm Cable)
The Caddx Nebula Pro Digital Camera features a 1/3" CMOS sensor,4:3&16:9 (Switchable), 720/60fps resolution, and comes in two colors: white and black.
Show details
This product has multiple variants. The options may be chosen on the product page
DIATONE MXC TAYCAN DUCT 3 INCH CINEWHOOP
MXC ACCESSORIES LINK MXC TAYCAN-Frame Kit Specification SKU: MX C3 Taycan rack DT-FK19-MXC3-TAYCAN Wheelbase: 158mm Weight: 175g Paddle size: 3 inch Top plate: 2mm Base...
Telemetry Radio V3 433MHz
A Holybro Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “out of the box”). The radio uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Copter, Rover and Plane.
F411-WING
FC Specifications MCU: 100MHz STM32F411 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: No VCP & 2x UARTs 2x Motors,...
FETtec ESC 4in1 3 – 6S 35A V1.1
Features:
- Active current limiting @ 35A
- Input voltage: 3S-6S
- High quality 40V MOSFETs
- STM32G071 @ 64MHz
- 128 kHz Motor PWM
- Full sine wave control
- Soldering holes for up to 5 additional capacitors
- KISS FC Passthrough
- Betaflight Passthrough (available in 4.1)
- Automatic input signal detection:
- Dshot 300-2400
- PWM
- OneShot42/125
- OneWire BUS with up to 8kHz looptime (one cable for all Motorsignals and Telemetry)
- New version 1.1
- more space around battery pads
- one blue LED for each ESC onboard
- new protection circuit for the signal IOs
- no more capacitors close to the mounting holes
Dimensions:
- 30mm wide x 35mm long
- Mounting hole: 20mm x 20mm, M2 expandable to M3
Firmware:
- New FETtec Firmware
- FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin
Scope of Delivery:
- FETtec 4in1 ESC 3 - 6S 35A
- Capacitor 470µF 50V, ESR < 1ohm
- JST-SH 8 Pin Cable
Recommandation:
For 6S batteries we recommand to use a FETtec Spike AbsorberRelated links to "FETtec 4in1 ESC 35A V1.1"
- Do you have any questions concerning this product?
- 3D Print Spacer 30x30 to 20x20 - Download @ Thingiverse
- FETtec ESC Configurator - Download @ GitHub
- Spacer for KISS v2 - Download @ Thingiverse by quadmovr
- Spacer for KISS v2 incl. wire holder - Download @ Thingiverse by quadmovr
- Further products by FETtec
Available downloads:
Furling32 4in1 Airport
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 55A burst and 45A continued
HGLRC FD435 STACK
HGLRC FD435 STACK 20X20 3-6S FD F4 Mini fc 35A BL32 4in1 ESC
FETTEC KISS F7 FC
Fettec F7 FC 30x30 and 20x20 KISS Firmware Flight ControllerCheck out our large variety of Flight controllers
Infinity 3s 5200mAh 70C
Specification: Brand Name: Infinity Item Name: Infinity 3s 11.1V 5200mAh 70c Lipo Battery Voltage: 11.1V Dimension: 28 x 45 x 140 (MM) Weight: 380g Output: #12 silicone-line, XT60 connector Features:...
Furling32 4in1 mini
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 55A burst and 45A continued.
Pyro32 F3 45A BLHeli32 4-in-1 ESC
If you want a rock solid and reliable ESC, the Pyro32F3 4-in-1 ESC is a great choice. Much of Pyro's product line is all business, with no unnecessary frills. This ESC was made to endure torture and give you confidence when pushing your quad to the limit.
Caddx DJI Digital HD FPV Camera
A single-camera module, which has a quick-release design for convenient replacement. The FPV camera does not come with a back cover or coaxial cables installed.Does not come with Air Unit Module. Cable not included, this is the camera only.
BETAFPV TOOTHPICK F405 2-4S AIO 20A (BLHELI_3...
Updated the F411 chip to F405, this new 20A AIO board handles a continuous current of 20A and a burst current of 22A, bringing pilots...
Caddx Turtles
Super WDR Mini FPV Camera 1080P 60fps FOV 145 Degree DVR HD Recording
HGLRC F4 Zeus AIO
HGLRC F4 Zeus STM32 F405Flight Controller AIO OSD BEC PDB Black Box & 15A BLheli_S 4 In 1 ESC
Morgoth X5 Carbon Molded FPV Racing Frame
PRODUCT DESCRIPTION The Morgoth frame is made in a 150°C high temperature molding process and prepreg premium quality carbon fiber. It’s the latest iFlight masterpiece...
MAMBA F405 STACK MK2 40A
MAMBA F405 Betaflight Flight Controller & F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
TS100 SOLDERING IRON B2
TS100 employs 304 stainless steel nested shell of Polycarbonate plastic. It is designed with safety circuit and anti-static structure, integrated with DC5525 12-24V port, dual-temperature sensors and accelerated sensors with STM32 chip. Under these functionalities, temperature can be controlled accurately, stably and easily adjusted from 100°C to 400°C, and the TS100 also has sleep mode and automatic over-heating warning.
OMNINXT F7
The OmniNXT F7 is Airbot’s top of the range flight controller based on the newly designed NXT architecture. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top. With the onboard damping box, the gyros run perfectly under 32k looptime. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. The NXT also comes with 2 different BECs and 6 UARTs.
Foxeer 5″ Aura Lite Freestyle & LR...
Material Toray T700 green carbon with silky coating Wheelbase 210mm Mouting hole 20×20/25.5×25.5 M2 Camera size 19x19mm Micro Size System Analog Cam/ HD Vista digital...
Show details
This product has multiple variants. The options may be chosen on the product page
Caddx Polar Micro Camera
The Caddx Polar Micro Camera is an FPV camera with a mega starlight sensor. The Caddx Polar has a minimum 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The camera is compatible with Vista and Air Unit modules.
MAMBA F411AIO BLHELI_S 25A ESC & FLIGHT ...
FIRMWARE TARGET ： BETAFLIGHT MAMBA F411 / EMU MAMBA F411 FLIGHTONE FALCOX (HAS LICENSING FEE) Diagram Link Specification: Brand Name: Mamba Model: MAMBA F411AIO Dshot600 4S MAMBA F411AIO -STM32F411 -Input voltage...
Furling32 4in1
New BLHELI32 ESC, give more smooth control and faster responding speed.
Supports up to 55A burst and 45A continued.
GepRc – KX5 Elegant
Our team keeps thinking that how to make a rack which is balanced both in competition and freestyle. Perhaps, GEP-KX5 can make you feel the good balance by its new and fresh design.GEP-KX5 is wished to be designed as a rack which is quite elegant and graceful. This is the reason why it is named as “Elegant”.
HGLRC XJB F433
Specification: Model: HGLRC XJB F433 Weight: 6.5g Usage: for 65mm-250mm Frame Kit Micro F4 V2 Flight Control Board ( D-Shot Version) MPU: MPU6000-SPI CPU: STM32F405RGT6,...
Show details
This product has multiple variants. The options may be chosen on the product page
Apex R-Light
T-Motor F45A 3-6S BLHeli_32 4-in-1 ESC
This ESC is T-Motor's 4-in-1 version of their popular F45A ESC. This 4-in-1 ESC packs 45A into an industrialized PCB layout made with premium features such as a 32bit main control chip, BLHeli_32 firmware, and 6s support.
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
MARK4 HD5 DJI FPV Freestyle Frame
- The perfect match DJI FPV Air Unit
- Full 3K Carbon Fiber Frame
- 3D printing parts are fixed and protected
- Super lightweight Freestyle frame
- FreeStyle Version
GepRC LSX (Leopard Stretched)
The leopard, natural predators, running at a staggering rateThis is GEP - LSX5, Leopard(GEP-LX) derivatives, ‘S’ mean is stretching. This is more suitable for competition. High-speed forward flight and rapid roll have more advantages. GEP-LSX respectively with three kinds of specifications.GEP-LSX4 wheelbase 205 mm, suitable for 4inch propeller. GEP-LSX5 wheelbase 230 mm, suitable for 5inch propeller, GEP-LSX6 wheelbase 265 mm for 6inch propeller.The frame use 3k ultra-light carbon plate + Aviation aluminum # 7075 body. To strengthen the four arm, we also design a fixed four arm of the aluminum alloy parts, it is not easy to make the machine arm shift.We also equipped with A piece of PDB, take BEC output 5 v 3 A and 12V 0.5A.The frame all adopt the YFS screws, 12.9 magnitude
ARCHER R10 PRO
The Archer R10 Pro has 10 high-precision PWM channel outputs and features excellent Anti-interference performance when it comes to spark-ignition on internal combustion models. It supports full-range signal strength with dual detachable antennas that assure optimal antenna reception and maximum range. In addition to all this, the R10 PRO can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with a SBUS port. This 10-channel receivers’ noticeable features are its Anti-vibration performance and dual-battery ports for redundancy.All of the Archer receivers are hyper-matched with the ACCESS protocol. They not only feature wireless firmware upgrades, increased range, and telemetry performance, the R10 PRO now supports more functions like configurable telemetry power, S.Port/F.Port switching and FLR output. Additional valuable features are under development to unlock the true potential of the ACCESS protocol.
Typhoon32 4in1 ESC 4x35A v2
4in1 ESC with 30.5x30.5 mm Mounting holes, supports DSHOT 1200, BLHELI32 firmware.
F5 – Fanatix Team By OreNero
F5 - this 5 inch freestyle Frame design by Oren Elimor (Mechanical engineer & freestyle pilot) in cooperation with Israeli top free style pilots to be on the cutting edge of drone technology.
GepRc GEP-Mark2
SUMMARY
This is a frame designed for Freestyle, called “Mark2”. After repeated design adjustment and testing, finally finished, let us present to you.Although Mark2 is a regular rectangular frame, it still wants you to know its design features. A lot of mechanical shapes are added to the design, and the whole is very sexy and science fiction. The four arm and aluminum alloy parts are fixed, easy to replace the new machine arm, and the fixed performance is good. The camera position can be very good to protect the camera from damageHigh-precision CNC aluminum alloy fixed parts, 3K full carbon fiber, 12.9 level YFS screw, give Mark2 to maintain strength advantage.Enjoy Freestyle.
HYPERLITE FREERANGE 5″ FREESTYLE HD FRA...
PRODUCT DETAILS Introducing the Hyperlite Freerange 5” LR Freestyle frame! This frame is a culmination of months of extensive testing by our team and our...
X-Knight 360 Carbon Fiber Frame Kit
X-Knight 360 Carbon Frame Kit is an innovative, versatile and functional design frame that is is designed to work seamlessly with Insta ONE R Camera...
MAMBA F405 MINI STACK MK2 25A
MAMBA F405 MK2 Mini Betaflight Flight Controller & F25 25A 2-4S DSHOT600 FPV Racing Brushless ESC
MARK4 FPV Freestyle Frame
I want freestyle frame to show more performance in flight,a Super lightweight Freestyle frame,more convenient installation of electronic devices and more balanced center of gravity, so as to achieve better Smooth flight shooting, These ideas build the freestyle frame Mark4.
GepRC LX5 Leopard
The leopard, natural predators, running at a staggering rate.This is the GEP-LX, also called ‘Leopard’, There are three kinds of specifications respectively. 4inch(wheelbase 195mm), 5inch(wheelbase 220mm), 6inch(wheelbase 255mm). The fuselage low center of gravity design.
Typhoon32 4in1 ESC 4x35A v1.2
4in1 ESC with 30.5x30.5 mm Mounting holes, supports DSHOT 1200, BLHELI32 firmware.
GepRC TSX5 (Viper)
GEP-TSX5 is made of 3K Carbon Fiber Quadcopter Frame plates and the Grand 12.9 YFS screw. The Stretch-X made it more adapted to the Racing. Our design teams decide to use 5mm(thickness) x 9mm(width) Arm to overcome wind resistance effectively. The motor seat is redesigned to a large extent to protect the motor. The camera seat works for most brands, Such as Runcam swift /swift2, Foxeer HS1190 and so on. The camera 20 to 60 degress. But I’d like to introduce the GoPro. 35-58 degress. Applies to most scenarios. Such as Racing and Freestyle.
Foxeer 5″ CAESAR Racing Frame T700
Material Toray T700 carbon with silky coating Wheelbase 200mm Mouting hole 20x20mm Camera size 14*14mm nano size Weight Weight 68g (excluded TPU Kit) Packing List...
ELRS Nano TX Module
BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible...
HGLRC FD413 STACK
HGLRC FD413 STACK 16x16 2-4S F411 Flight Controller 13A BLS 4in1 ESC
Zdrone Xlightning
This is a light weight drone racing frame.The goal of this quadcopter frame was low drag, low weight, high durability, extremely high serviceability, reasonable component protection and low cost frame and parts.
XL7 True X
iFlight XL7 True X 7 inch 281mm Low Ride FPV Freestyle Frame KitThis freestyle frame gives you ultimate control over weight distribution and CoG by not only allowing the use of M3x28mm standoff but also offering a reversible build orientation for a true mid-mount set up.
XBEE X-V2
Exciting new racing frames from Korea - the Xbee v2 is a well designed frame that is equaly at home freestyling as it is racing. The built in go pro incliner included and rounded edge arms.
These new Xbee frames are sure to be winners
XBEE X V2 (Stretched Xbee)
Exciting new racing frames from Korea - the Xbee v2 is a well designed frame that is equaly at home freestyling as it is racing. The built in go pro incliner included and rounded edge arms.
These new Xbee frames are sure to be winners
OMNIBUS Fireworks v2
The Omnibus Fireworks flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfectly under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
TrampHV VTX
The most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20mm, the TrampHV is also the smallest direct LiPo-powered vTx in the business.
ARCHER GR8 receiver
The ARCHER GR8 receiver features the new ACCESS protocol. ACCESS provides the lower latency and increased performance of our previous G-RX8 receivers. With OTA (Over-The-Air) function support firmware upgrades will be very easy, no more wires. The ARCHER GR8 also has an upgraded high precision variometer that gives pilots more accurate and quicker altitude and vertical speed data. Now you can enjoy more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter.
HYPERLITE FLOSS 3.0 LITE RACE FRAME “5 ...
Checkout below the Hyperlite Floss 3.0 Lite in action by Team Pyrodrone pilot Andy DolmaFPV The Floss 3.0 our most selling race frame ever went on diet!This is the LITE version of the Floss 3.0 which is pretty much identical...
HYPERLITE FLOSS 3.0 RACE FRAME “5 INCH&...
The Floss 3.0 is designed FOR racers BY racers as the next evolution of the most popular racing frame. Based around a high quality,anodized 7075 aluminum core, the frame features sandwich plates and individual, interlocking, easy to change arms to...
KESTER 245 Flux-Cored Wire 1.1Lb 0.6 Diameter...
Sn63Pb37 2.2%/245 .025 1 LB SPL 0.6 Diameter (mm)
Show details
This product has multiple variants. The options may be chosen on the product page
Foxeer T-Rex 1500TVL
Foxeer T-Rex 1500TVL 6ms Low Latency Super WDR FPV Camera
ARCHER R8 PRO
The Archer R8 PRO has 8 high-precision PWM channel outputs and features excellent Anti-interference performance when it comes to spark-ignition on internal combustion models. It supports full-range signal strength with dual detachable antennas that assure optimal antenna reception and maximum range. In addition to all this, the R8 Pro can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with a SBUS port.
GEP-IX5 Fairy
GEP-IX5, is our new frame, called “Fairy”. 5 inch props, wheelbase is 200mm.“Fairy” is suitable for racing, the “True X” structure, wheelbase only the 200mm, the 5 inch props.Tail lights integrated 6 bright LED tail lights and the buzzer. LED tail lights support that FC (Betaflight / CleanFlight) control the color and the condition of the lights.The biggest feature is in the nose of this frame, used the 3D TPU printing and the camera mount designed by 35 degree angle inclination. It can extremely reduce the wind resistance.
GepRC RX5 (Hawk)
Hawk, The dive speed of the prey is exciting.
This is the Hawk, The model name is GEP-RX5. Wheelbase 210mm, can be used for 5 inch propeller. “True X”Structure. This design is not difficult to see that the first two and two arm arm horizontal staggered, this helps to reduce turbulence, increase the efficiency of wind suction impeller.Gopro elements can be adjusted to adjust the range of 20-50 degrees, the lens is perfect support Hs1177, Hs1190, swift, Plus OWL and other most lenses. Lens distance 28mm. A reasonable layout, the factory comes with 10 WS2812B lights, support the microcontroller or flight control. Motor protection like a fish, to protect the motor to a certain extent, very good. Whole machine using YFS screws, the factory comes with a golden version. Random comes with BEC, 5V/12V PDB output. Save most of the time the player.
EV-PEAK E3
EV-Peak E3 35W 3A Smart AC Balance Charger for 2S-4S LiPo/LiHV Battery
APEX F7 Flight Control
APEX F7 Flight Control BlueTooth On Uart Double Gyro (TDK – InvenSense MPU6000, TDK – InvenSense ICM-20602) DJI FPV Platform Plug OSD On SPI Barometer...
FrSky RX8R PRO
An upgraded version based on the RX8R receiver, it has all the same features including redundancy. The Pro version has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. A feature that deserves mention is the decreased effect of interference caused by the ignition process.
RaceOne R1 X5
iFlight R1 X5 220mm FPV Freestyle and Racing Frame 4mm Removeable ArmsTaking the same great platform from the R1 X5 220mm, we built something a bit more spacious, and more importantly, stuck the battery on top! This is super helpful for filming/freestyle, it gives the quad more planted flight characteristics
Show details
This product has multiple variants. The options may be chosen on the product page
Foxeer Mini Cat 3 StarLight Night FPV Camera
Cat 3 1200TVL 0.00001Lux StarLight FPV Camera
TBS UNIFY PRO 5G8 V3 (SMA)
It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)
Kakute F7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
TMOTOR AIR 40A
• Special core program
• Special optimized firmware
• Highly-intelligent and adaptive
• Twisted-pair design
Airbot F7 V1.1
F722 / 5VBEC / Camera control / 6x UART / Flash
PDF Downloads
infinity Graphene 14.8V 2600mAh 70C 4S
New Arrival For Infinity Graphene 14.8V 2600mAh 70C 4S Lipo Battery Rechargeable SY60 Plug Connector for RC Multicopter Toys
Micro M8N GPS
The NEO-M8 is optimized for cost sensitive applications, while NEO-M8N and NEO-M8Q provide best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
FrSky S8R 8/16 channel Receiver with 3-axis S...
The S8R is a FrSky 8 and 16 channels receiver built-in 3-axis gyroscope and 3-axis accelerometer sensor module. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X series receiver if it is required.
TBS SOURCE ONE HD 5INCH (V4)
The SOURCE ONE is a wide-stance X configuration frame, popular for freestyle or free-range acrobatic flying. It is built to withstand harsh crashes and abuse. It fits and protects all the classic FPV components and is optimized for light weight. The SOURCE ONE is a perfect everyday workhorse for casual FPV flying and competitive freestyle.
GPS MODULE M8Q
Features
- 72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C
- On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
- Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity
- Build-in embedded GNSS patch antenna, low power consumption
- The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design.
- Magnetic sensor QMC5883L integrated
- Max navigation update rate Single GNSS up to 18 Hz 2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz
- Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP
- Velocity accuracy 0.05m/s
- Cold start 26 s Aided cold starts: 2 s Hot start 1 s
- Sensitivity Tracking & Navigation: –165 dBm Reacquisition: –158 dBm Cold start: –146 dBm Hot start: –155 dBm
- Input voltage range: 4~6V
- Power consumption: 40mA
- Uart (Tx,Rx) interface for GPS SAM-M8Q
- I2C (DA,CL) interface for Compass QMC5883L
- Battery for HOT module start
- Power LED(Red) & Time pulse LED(Blue)
- Dimensions: L20 x W20 x H10 mm
- Weight: 7 gram
- Supported by INAV/Betaflight/Ardupilot, ect.
Including
- M8Q-5883 module, 1 pc
- SH1.0-6P 20cm silicon wire, 1 pc
- Transparent PVC Heat-shrink tube
Tips
- GPS, GLONASS, SBAS, QZSS are enabled by default
- u-blox M8Q series has no external flash memory
- Blue PPS LED blinking(1Hz) means 3D fixed
- update rate 1Hz & baudrate 9600 default
- Baud 9600~115200 supported by INAV/BF/Ardupilot
- update rate 5Hz with INAV UBLOX Protocol
- update rate 10Hz with INAV UBLOX7 Protocol
- Compass Alignment(Arrow forward and flat mounting): INAV/BetaFLight: CW 270° Flip when flight controller arrow is facing forward also Ardupilot/Mission Planner: Rotation None
- BF doesn’t support GPS position hold and RTH, GPS Rescue mode is supported by BF3.5 or last.
- No need compass for Fixed wings with INAV firmware
- The scratches on ceramic antenna are the result of tuning the antenna by ublox.
- Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
Show details
This product has multiple variants. The options may be chosen on the product page
Apex Multiplex
A Corporation between APEX and IBN_FPV After a full year of hard work include designs, prototypes, manufacture, and lots of tests to eventually bring you a compact cinematic platform.
It can simply be equipped with high-end carbon nylon protected guards to fly in small places or near soft objects.
These guards are designed to last! with small profile to less affect the flight characteristics and to still be protective. no more wiggle you get on full ducted guards on a windy day, or when trying to do a quick maneuver.
It is no like other cine frames you just remove the guards with 2 screws and fly this beast like any other freestyle/agile cinematic frame. It was designed to carry a full-size go pro with no need to take apart a brand new GoPro.
hopefully, you will enjoy it as we do. APEX IBN_FPV
FORTINI F4 OSD 32Khz Flight Controller Rev.2
Furious FPV Fortini F4 OSD - Seeing Is Believing.
KESTER 245 Flux-Cored Wire 1.1Lb 0.8 Diameter...
Sn63Pb37 2.2%/245 .03 1.1 LB SPL 0.8 Diameter (mm)
OMNIBUS AIO F4 V6
OMNIBUS F4's upgrade version, using F405 and new target, with 5x UARTs now.
INFINITY 2200MAH 4S 45C GRAPHENE TECH LIPO BA...
Description: Brand name: Infinity Specification:2200mah 45C 4S1P Voltage: 14.8V Weight: 236Gr. + – 2Gr. Output: XT60 ConnectorDimensions: 107mm x 34mm x 32mm Features: Support 5C...
RadioLink TS100
Radiolink TS100 Mini M8N GPS Module UBX-M8030 For Radiolink Mini PIX F4 Flight Controller
WORLDWIDE DELIVERY
© Created with by Gal Vital.
